|
|---|
Part #: BEN-BN15815
This size bit is used universally throughout the telecommunication industry for hex pin-in-head (5/32") security fasteners. First developed for the Bell Telephone Operating Companies, these fasteners are now common in locking pre-wire terminal boxes for telephone and CATV applications. The other end is a #2 Phillips.
Pack of 2
Items this product has been ordered withBEN-UPB22
Top of Page
|
Part #:
BEN-UPB200
Aussie Lineman's Pliers by Benner-Nawman®. This is a unique design from the land down under. This has a by-pass cutter that can cut up to 50-pair communication cable. The pliers will grip and hold the smallest wire and there is a built-in crimper. Made from forged tool steel and heat-treated for long life. Heavy duty orange plastic handles. The overall length is 8-1/2". Not designed for cutting steel or ACSR materials.
Top of Page
|
Part #:
BEN-UPB22
The Benner-Nawman® Booth Wrench is used universally throughout the telecommunication industry for hex pin-in-head (5/32") security fasteners. First developed for the Bell Telephone Operating Companies, these fastener are now common in locking pre-wire terminal boxes for telephone and CATV applications. The shaft measures 5-1/4" long and the handle adds an additional 3-1/2" to the length.
Top of Page
|
Part #:
BEN-UPB240
The UP-B240 Shark can cut 100-pair telephone cable, 4/0 aluminum and 2/0 copper. This is the best high leverage cutter. The special grinding and blade design cannot be found in any other tool. There are other tools available in the market but if you actually compare cut for cut the Shark has no competition. Made in the USA from forged tool steel with a specially honed cutting blade that is designed like no other, ask for The Shark by Benner-Nawman®.
Top of Page
|
Part #:
BEN-UPB36
Benner-Nawman® Cable Slitter, slits 1, 2, & 5 pair buried or aerial drop wire and for sheathing 25 & 50 pair communications cable
Top of Page
|
Part #:
BEN-UPB41
This is the lineman's best cutter for multi-stranded communication cable. It has a patented offset bite which eliminates compression and frayed ends. It can easily cut 50 pair communication cable, 2/0 aluminum cable and #2 copper cable. Lightweight and compact (only 8" long), it will fit conveniently in your tool pouch or belt. Look for the orange handles. Benner-Nawman®
Top of Page
|
Part #:
BEN-UPB45
Why carry a selection of screw drivers in your pouch when this socket driver will replace them all. This tool is VDE and GS certified to 1000 volts. Included with the tool are 3 Phillips and 3 straight point hardened tips as well as 4 hex tips(3/16-1/4-5/16-3/8). This driver is comfortable and durable.
Top of Page
|
Part #:
BEN-UPB606
Wire Prep Kit, includes: Serrated Scissors with a notch to keep wire from slipping during cutting, Cable Splicers Knife, and Leather Pouch. Specifically designed for telephone wire and light gauge fiber optics.
Top of Page
|
Part #:
BEN-UPB76
The UP-B76, also known in the cabling business as The Banana Cutter because of the distinctive yellow handles, is used by CATV installers on coaxial cable all over the world. This clean cutting, one-handed instrument is both lightweight and compact to fit into a tool pouch. It is designed to function just like a tube cutter to eliminate cable distortion during cable preparation. This tool was designed to cut up to 3/4" cable. The UP-B76 is the ideal tool for telecommunication, computer and CATV industry applications.
by Benner-Nawman®
Top of Page
|
Part #:
BEN-UPB95
Like the famous Banana Cutter, the UP-B95 is designed specifically to cut coaxial cable. The difference is that BN engineered a special cutting blade surface that can cut a cable up to and including 1" in diameter. It is designed to function just like a tube cutter to eliminate cable distortion during cable preparation. Like all of their cutting tools, the UP-B95 is dropped forged tool steel and hand-finished by skilled craftsmen here in the USA by Benner-Nawman®
Top of Page
|
Products
>Manufacturers>Bomar Interconnect
|
|---|
Part #: 300668SEZ
Bomar Interconnect Shielded RJ45 plug. The patented EZ-RJ45™ connector simplifies installation by allowing the pairs to be inserted through the connector. There is no difficult liner or wire bar to deal with. Inspection of the correct conductor order is done before crimping so no connector is wasted because of incorrect wiring. The conductors are able to be pulled forward so the pairs are very close to the contacts.
1+
$2.59 | 10+
$2.3310 | 50+
$2.2015 | 100+
$2.0720 | 500+
$1.8130 | 1000+
$1.6058 |
Top of Page
|
Part #: BOM-300566EZ
Bomar Interconnect EZ-RJ11/12 6P6C plug, patented design allows wires to pass through the connector prior to crimping, making verifying proper pinout EZ.
Instock now QTY: 8,000+
1+
$0.57 | 25+
$0.5130 | 50+
$0.4560 | 100+
$0.4275 | 500+
$0.3990 | 1000+
$0.3705 |
Top of Page
|
Part #:
BOM-300568EZ
Bomar EZ-RJ45 plugs with the new patented EZ-RJ45™ connector simplifies installation by allowing the pairs to be inserted through the connector. There is no difficult to handle liner or wire bar to deal with. Inspection of the correct conductor order is done before crimping so no connector is wasted because if incorrect wiring. The conductors are able to be pulled forward so the pairs are very close to the contacts. This method allows the integrity of the pairs to maintain Category Five, and even enhanced Category 5 and Category 6 capabilities. (50 u in. gold)
In-stock now QTY: 5,000+
1+
$0.85 | 50+
$0.8245 | 100+
$0.8075 | 250+
$0.7480 | 500+
$0.7055 |
Top of Page
|
Part #:
BOM-300668EZ
Bomar EZ-RJ45 plugs with the new patented EZ-RJ45™ connector simplifies installation by allowing the pairs to be inserted through the connector. There is no difficult to handle liner or wire bar to deal with. Inspection of the correct conductor order is done before crimping so no connector is wasted because if incorrect wiring. The conductors are able to be pulled forward so the pairs are very close to the contacts. This method allows the integrity of the pairs to maintain Category 6 capabilities. (50 u in. gold)
In-stock now QTY: 9,000+
1+
$1.0240 | 50+
$0.9216 | 100+
$0.8909 | 250+
$0.8704 | 500+
$0.7680 |
Top of Page
|
Products
>Manufacturers>Byte Brothers
Byte Brothers manufacturers high quality LAN test equipment such as the RWC1000 Real World Certifier which can certify network cables, store up to 250 tests, collect data such as length, skew, delay, speed. TVR10/100/100 is a simple LAN tester not only tests cable mis wires but also with verify connectivity with 10/100/1000 Base-T LANs, & can be used inline to determine negotiated speed (between two devices). |
|---|
Part #:
CPK1000
Cable&Power Kit. Combines the Real World Certifier digital cable tester with the Power Panel Cat5/6 DVM.
This kit gives you the high performance Real World Certifier (with 250 report storage) with the Power Panel Cat5/6 DVM at a terrific savings. This kit has everything you need to thoroughly test cables and devices plus determine exactly what is on your Cat5/6 network. And, if you work with PoE, you can test for voltage and test the operation of your PoE voltage source.
Want more information? Please select one of our videos
Top of Page
|
Part #: CPK1000IL
Cable&Power Kit. Combines the Real World Certifier digital
cable tester with the Power Panel Cat5/6 DVM.
This kit gives you the high performance Real World Certifier
(with 250 report storage) with the Power Panel Inline Version Cat5/6 DVM at
a terrific savings. This kit has everything you need to
thoroughly test cables and devices plus determine exactly
what is on your Cat5/6 network. And, if you work with PoE,
you can test for voltage and test the operation of your PoE
voltage source.
Want more information? Please select one of our videos
Top of Page
|
Part #:
CTX590
ProTone Wire Locator Kit from Byte Brothers.
FEATURE LIST:
Bright Light: Ultrabright LED illuminates even the darkest wiring closets to promote accurate, safe work.
Clear Tone Operation: Fluorescent hum filtering circuitry included standard.
Safety warning: 60HZ red colored LED warns of the presence of AC voltage.
Multiple Connection Methods: RJ11, RJ45, and Alligator clips.
Volume Control
Protective Pouch
Convenient built-in voltage, polarity and continuity sensing: A bicolor LED on the tone generator indicates three important functions.
---1) Voltage present (AC or DC)
---2) Polarity: If voltage is present, its polarity is indicated.
---3) Continuity: The perfect, quick way to check for continuity.
Both units operate with a 9 volt battery.(included)
Top of Page
|
Part #:
POE1000
CAT5/6 cables are jammed with data, phone, surveillance cameras.... and now 48 volts of PoE ("Power over Ethernet"). The Power Panel DVM spots these devices. Plus, two interactive buttons exercise both switches equipped with or without POE.
Want more information? Please select one of our videos
Items this product has been ordered with101-23-750
Top of Page
|
Part #: POE1000IL
The most popular Power Panel CAT5/6 DVM model has all the features of the Standard unit plus the ability to connect between 2 devices inline. Inline connections allow: passing PoE power to the device, monitoring the device while it is on, plus the Inline Power Panel measures and displays power in Watts.
CAT5/6 cables are jammed with data, phone, surveillance
cameras.... and now 48 volts of PoE ("Power over Ethernet").
The Power Panel DVM spots these devices. Plus, two
interactive buttons exercise both switches equipped with or
without POE.
Want more information? Please select one of our videos
Items this product has been ordered withCPK1000IL
Top of Page
|
Part #:
RWC-EG005
A Hub, Switch, or PC connected to a cable provides the real data that allows the Real World Certifier to conduct Level 2 tests on the cable. This Cisco switch is the perfect unit to drive the cables when no other driver is onsite yet. It is small and lightweight and drives all 4 pairs of the cable to a maximum of 1000MB
Top of Page
|
Part #:
RWC1000K
Byte Brothers Real World Certifier
Features:
Speed Tests
Real World Cert 1 (projected)
Real World Cert 2* (confirmed)
Cable Typing (Cat3,5,5E,6)
Cable Length TDR
opens,shorts, split pairs
Multi-pair Toner/Probe
Stores 250 tests for printing
*Uses real data from the Hub, Switch, or PC
If you have any questions
Want more information? Please select one of our videos
Top of Page
|
Part #:
TVR10/100/1000
Test, verify and repair 10, 100 and 1000 Base-T Networks. The TVR10/100/1000 supports all network speeds plus displays full and half duplex. Go inline between two LAN devices and see if the negotiated speed is what you expect, and if it is somplex/duplex.
Want more information on the TVR10/100/100 watch the video
Top of Page
|
Products
>Manufacturers>Ideal
|
|---|
Part #:
IDL-30496
Ideal®, crimper for 2, 4, 6, & 8 pin modular plugs, parallel crimping action assures straight pin crimping
Top of Page
|
Part #:
IDL-30499
Ideal® crimper for handset, 2, 4, & 6 pin modular plugs, RJ11/14/22/25 parallel crimping action assures straight pin crimping
Top of Page
|
Part #:
IDL-30503
Ideal Crimpmaster CATV ratchet crimper, hex for RG-59 & RG-6 'F' connectors, crimp dimensions: .354" .323" .255", replacable jaws
Top of Page
|
| |
|---|
Call using Skype
