|
|---|
Part #:
VTTEST15
Audio Cable Tester - 10 Way
quick and convenient continuity cable testing for all types of audio cables
FEATURES
continuity test function (buzzer and LED indication)
suited for the following connectors and their combinations:
1/4" jack
3.5mm jack
XLR 3Pin (M/F)
XLR 5Pin (M/F)
phono / RCA
banana plug
Speakon 8P
Speakon 4P
DIN 3P / 5P / 7P / 8P
5-pin mini DIN
LEDs confirm each conductor connection
9-way switch for selecting connections to be tested
battery check function
rugged, compact, metal construction for ultimate roadworthiness, long life and reliability
includes one pair of probes
Top of Page
|
Part #:
ZM-104
TOA Impedance Meter, use to troubleshoot 25 & 70 volt paging speaker lines. Figure actual wattage draw on amplifier. Finding a short or an 8 ohm speaker in the line is a frustrating ordeal without this unit. A must have tool for commercial paging installation and service.
Measures impedance of speaker lines up to 100k ohms
Batteries: four (AA)
Zero adjustment for accuracy on all ranges
Easy to read meter calibrates directly in ohms
Includes carrying case, test leads and impedance to power reference chart
Five year warranty
Spec sheet (PDF)
Z-Meter impedance to power conversion chart (PDF)
Review of TOA ZM-104 and applications for using the Z-meter (PDF)
Top of Page
|
Products
>Tools>Compression Crimpers
|
|---|
COMPRESSION CONNECTORS
|
|---|
Part #:
50113
Economy Compression Crimp Tool, works with all of our compression connectors and most other brands, adjustable, fits F, RCA & BNC connectors.
Top of Page
|
Part #:
5016201
Compression Crimp Tool, works with all of our compression
connectors and most other brands, adjustable, fits F RCA &
BNC, Cushion Grip Handles
Top of Page
|
Part #:
5016207
Compression Crimp Tool, works with all of our "F" compression
connectors and most other brands, not for use with RCA or BNC connectors, but if you're doing alot of F connectors, this small tool works great, feels "right" in your hand and it's only 5 1/2" long
Top of Page
|
Products
>Tools>Cutters & Strippers
|
|---|
|
|---|
Part #:
100-318
Economy UTP stripper & 110 Punchdown Tool, This cheap thing actually works pretty good. The twisted pair stripper can cut the outer insulation without nicking the inner insulation, if you only go around once. The 110 punch is great for keystone jacks and patch panels, much less bulk in your hand than standard punch tools.
Try one they're cheap!
1+
$2.95 | 5+
$2.25 | 10+
$1.4750 |
Top of Page
|
Part #:
10503
The dual function Cut-N-Strip tools' small size and ease of use delivers superior performance and utility of function. The cutting jaws provide a low profile full-flush cut and are manufactured from induction hardened stainless steel for long life. The patented stripper in the handle self-adjusts to wire sizes of 26 AWG to 14 AWG. Catch, hold and strip wire in one quick motion. Cool Tool!
Top of Page
|
Part #:
10512
Heavy duty, high leverage design provides singlehanded cutting action on a wide variety of hard to cut materials. Blade is designed to ensure a clean cut without pinching or crushing. Maintains concentricity to allow fittings
and terminals to go on easily.
Contractor quality
Forged from chrome molybdenum & hardened
to 58-60 HRC
Rust resistant electrophoretic deposition
finish
Smooth spring action for easy, repetitive
cutting
Handles contoured for comfortable hand
grip
!
Material / Cutting capacity
Stainless steel wire (3.0mm / 1/8" / 0.118")
Stainless steel wire rope (2.0mm / 5/64" 0.079")
Piano wire (3.0mm / 1/8" / 0.118")
Iron wire (4.0mm / 5/32" / 0.157")
Threaded steel rod (4.0mm / 5/32" / 0.157")
Steel bolts (4.0mm / 5/32" / 0.157")
Top of Page
|
Part #:
10525
Designed for use in electrical, telephone and datacom service applications. The ergonomically designed large ring provides more power while reducing fatigue and wrist strain. Designed to comfortably fit in the power portion of the palm producing a cleaner, quicker cut with less effort. Bottom blade has serrated teeth the full length of the cutting edge to grip the cable/wire. Thru hardened (RC59).
Cuts stranded wire to 12 AWG
Cuts solid wire to 16 AWG
Trims kevlar in fiber optic cable
Strips 19 to 23 AWG wire
Serrated edges on back of blades for cleaning wire and binding posts.
Top of Page
|
Part #:
10531
The 5" Side Cutting Pliers are perfectly suited for field or production line work. Use for cutting copper wire or trimming leads with the full flush cutting blades. The tool is manufactured from high carbon tool steel, precision ground and hardened for long life. Molded comfort grip handle. Rust resistance black oxide finish.
21° Full Flush Cut
Cuts up to 16AWG Copper
Spring Action
Top of Page
|
Part #:
10560
This versatile cutter has a specially designed moving blade to handle the larger diameter telephone cables and soft drawn copper and aluminum cables. Cuts up to 2,700 pair telephone cable and up to 750 MCM soft drawn copper and aluminum cables. Cutting blades are manufactured from hardened tool steel for long life durability. The fixed handle cutting boot provides stability and increased leverage. Ratchet lock holds handles in closed position for storage. Black oxide finish.
Top of Page
|
Part #:
15015
Cable Jacket Stripper, Designed for stripping the cable jacket on Category 5, 5e cables, No Adjustments required, Will not nick inner conductors
Top of Page
|
Part #:
15028
The new Pro Strip 25R is a rugged 2 level coaxial cable stripper designed for the professional contractor. Quick change blade cartridges are factory pre-set for industry standard 1/4" cable preparation eliminating the need for tedious, time consuming blade depth adjustments. Stainless steel rollers provide smoother concentric, non-binding rotation on a wide range of cables for fast professional results. No adjustments required!
For use on RG6 RG59 and all RGB cables
Perfect for Belden 25AWG home choice
Industry standard 1/4' strip length.
Pre-set quick change blade cartridges.
2 stripping ports for broader range of cables.
Rugged high impact plastic housing.
Long life stainless steel blades.
Top of Page
|
Part #: 15029
Replacement Blade Cartridge for the ProStrip 25R 15028
Top of Page
|
Part #:
200-001
Wire Stripper, strips 20-30AWG wire, built-in wire cutter & pliers
Top of Page
|
Part #:
200-007
Eclipse® economy stripper, strips 10-30AWG wire
Top of Page
|
Part #:
200-010
Wire Stripper, strips 10-20AWG wire, built-in wire cutter & pliers
Top of Page
|
Part #:
200-026
Cyclops Data Cable Stripper, fast easy removal of outer sheath insulation (PVC & Plenum) from UTP, STP, & multicore cables up to .433" diameter
Top of Page
|
Part #:
200-046
Cable Cutter, cuts up 2/0 wire or 100 pair telephone cable, use on copper cable only
Top of Page
|
Part #:
250112
Coaxial cable stripper, auto-adjust for RG58/59/6, 2 blade, includes allen wrench for fine tuning
Top of Page
|
Part #:
BEN-UPB200
Aussie Lineman's Pliers by Benner-Nawman®. This is a unique design from the land down under. This has a by-pass cutter that can cut up to 50-pair communication cable. The pliers will grip and hold the smallest wire and there is a built-in crimper. Made from forged tool steel and heat-treated for long life. Heavy duty orange plastic handles. The overall length is 8-1/2". Not designed for cutting steel or ACSR materials.
Top of Page
|
Part #:
BEN-UPB240
The UP-B240 Shark can cut 100-pair telephone cable, 4/0 aluminum and 2/0 copper. This is the best high leverage cutter. The special grinding and blade design cannot be found in any other tool. There are other tools available in the market but if you actually compare cut for cut the Shark has no competition. Made in the USA from forged tool steel with a specially honed cutting blade that is designed like no other, ask for The Shark by Benner-Nawman®.
Top of Page
|
Part #:
BEN-UPB36
Benner-Nawman® Cable Slitter, slits 1, 2, & 5 pair buried or aerial drop wire and for sheathing 25 & 50 pair communications cable
Top of Page
|
Part #:
BEN-UPB41
This is the lineman's best cutter for multi-stranded communication cable. It has a patented offset bite which eliminates compression and frayed ends. It can easily cut 50 pair communication cable, 2/0 aluminum cable and #2 copper cable. Lightweight and compact (only 8" long), it will fit conveniently in your tool pouch or belt. Look for the orange handles. Benner-Nawman®
Top of Page
|
Part #:
BEN-UPB606
Wire Prep Kit, includes: Serrated Scissors with a notch to keep wire from slipping during cutting, Cable Splicers Knife, and Leather Pouch. Specifically designed for telephone wire and light gauge fiber optics.
Top of Page
|
| |
|---|
Call using Skype
