8" ceiling speaker includes: 70 volt transformer, volume control and plastic grill.
Taps: .625W, 1.25W, 2.5W, 5W, and 10Watt
10 oz dual cone speaker
92db spl @ 1W/1M

10 Watt Single Gang 70.7V Commercial Attenuator
Auto-transformer
White faceplate

10 Watt Single Gang Stainless Steel 70.7V Commercial Attenuator
High-quality auto transformer provides the advantages of excellent frequency response, low insertion loss and reliable performance for volume control application in 25 and 70.7-volt systems. Attenuation is accomplished in ten make before break steps plus positive off position. (No stop between maximum and off position to prevent switch damage). Contacts are silver plated for noise-free operation. Features a removable terminal block. Includes stainless steel plate, with stamped and filled dial scale and a skirted black knob.

Lucent Trunk Adapter, for use with PagePac 6 and Pagepac 20 amplifiers when a dry contact closure is not available.

PagePac6 Portsaver, use with a pagepac6 amp when telephone system has no pageport or extra CO line input.
comcode: 405703026

AT&T® Speaker backbox, 8", for fire code compliance when speakers are mounted in air plenum ceilings
special purchase limited quantities

Lucent Desktop Speaker 45 ohm, covers 250sq. feet, works with Pagepac 6 Pagepac 6+ and Pagepac 20 amplifiers

75 Watt 70 Volt attenuator, volume control for 70 volt systems

AT&T® 8" speaker with weather treated cone, in a white steel cabinet.
Designed for use outdoors under eaves for some protection.
70 volt with 1/4 to 4 watt taps
New Old Stock
limited quantities

The LUPCMALL is a pre-assembled and tested 3-zone PCM system. Use it right out of the box for 1 to 3 zone applications or expand it with other PCM modules.

Provides 1 to 3 paging zones
Expandable up to 99 zones*
Emergency All-Zone Override Paging input
Two way communication
250W power handling capacity(separate amplifier required)
Drives up to 40 self-amplified speakers per zone module
Night Ringer, 90V and contact closure
Real-time Clock & Master Clock Synchronization*
Time Triggered Signaling Tones*
Power Supply included
comcode: 408186013 Labeled Avaya, unit is the same as a Bogen PCMSYS3 plus this unit also includes the TBM talkback module.

Avaya® 8" ceiling speaker includes: white metal grill, 45 ohm voice coil, volume control
special purchase limited quantities

The Bogen VRS1 is a vandal-resistant speaker designed for hands-free two-way communications. The VRS1 consists of a 3-inch, weather resistant, cone-type speaker and a 25V transformer (tapped at 1/2 watt). The transformer can be bypassed for 8-ohm operation. The speaker and transformer are mounted on a #11-gauge stainless steel faceplate. The speaker is protected from harm by the faceplate, a baffle plate with stamped perforations, and a grille screen. The VRS1 includes a heavy-duty metal push button switch that protrudes slightly from the faceplate and can be used to initiate a call to a control center. The switch can be wired for use with systems that require a momentary contact closure for call annunciation and includes a silicon-controlled rectifier circuit for use with systems that require latching operation.
The plate may be mounted to a 2-1/2” deep Gang Box (4-1/2” W x 6-13/16” H), such as the Thomas & Betts (H2BD-3/4 &1), with included one-way security screws.

•Heavy-duty vandal-resistant and weather-resistant construction
•8-ohm or 25V (1/2 watt) operation
•Call-in switch on VRS1 can be wired for momentary or latching operation
•One-way security hardware included

Bogen® 3 Zone Paging Module, field programmable paging groups, direct connection to page ports-loop start and ground start trunks, 100W power handling, preannounce and confirmation tones, built-in night ringer
limited quantities

Winegard FM Antenna 88-108MHz, 2 element, 12"L x 67"W x 10"H, omnidirectional,

Speaker Support Truss for 2X2' and 2X4' ceiling tile grids
For use with 8 inch speakers using a 12 inch grill
measures 23.5" X 11.5" speaker opening is 8-3/8" X 7-5/8"
Grill mounting holes at 12.5" 11.25" 10.25" and 9.125" diameters