Products
>Tools>Tele/Data Test Tools
|
Part #:
400-004
Eclipse® Cable Tester, two piece unit tests modular RJ 11/14/25/45, UTP/STP, tests patch cables & in-wall installations, includes soft shell case
Top of Page
|
Part #:
400-042
Eclipse Buttset features: Speakerphone, LED Polarity indicators, Angled Bed of Nails, Clip Hanger, Tone/Pulse, 12 Number Speed Dialer, Mute Switch, Last Number Redial, Auto Shutoff
Top of Page
|
Part #:
500-046
Telecom Installer Toolkit includes: 400-042 Buttset w/speakerphone Modular Plug Crimper for 4, 6, & 8 pin Punchdown Tool w/66 & 110 blade RJ45 two piece Cable Tester Needle-nose Pliers Sidecutters 4 Screwdrivers ToolBelt
Top of Page
|
Part #:
AIN-140B/MC/6A
Aines® Tone Test Set, emits 1000Hz steady tone or 500/1000Hz alternating tone, RJ11 plug plus cloth leads with HD 6A clips, use to: trace installed wire, provide talk battery, continuity tests, CO line condition
Top of Page
|
Part #:
AIN-AMA6
Aines® 6 conductor modular breakout adapter, RJ25(6 pin) jack on both ends wired straight-thru, belt clip, 10" cable included
Top of Page
|
Part #:
AIN-AMA8
Aines® 8 conductor modular breakout adapter, RJ45 jack on both ends wired straight-thru, belt clip, 10" cable included
Top of Page
|
Part #:
AIN-BH2L
Butt-set Snap Hook, w/2 screws fits any unit with this type hook, can be used on other tools for clip-on ease
Top of Page
|
Part #: BI--FAULTCASTER BI Communications FaultCaster is a palm-top Digital Time Domain Reflectometer, Fault Locator and Cable Length Meter designed to detect and locate faults on all types of copper cable up to a distance of 6,000ft Fast-Edge Step TDR technology enable the FaultCaster to identify opens and short circuits, and directly indicate the fault distance on an alpha-numeric LCD, with better range and resolution than existing products An internal library of standard cable types enables accurate measurements on cables without the necessity of entering Velocity Factor information In the event that the FaultCaster is connected to a live cable a warning will be displayed, and alarm tone sounded and testing inhibited.
The FaultCaster incorporates an oscillating tone generator, that is detectable using a standard tone probe, for use in the tracing and identification of pairs within a cable It is housed in a tough, ruggedized ABS plastic housing, water and dust proof to IP54, and supplied complete
Top of Page
|
Part #:
CPK1000
Cable&Power Kit. Combines the Real World Certifier digital cable tester with the Power Panel Cat5/6 DVM.
This kit gives you the high performance Real World Certifier (with 250 report storage) with the Power Panel Cat5/6 DVM at a terrific savings. This kit has everything you need to thoroughly test cables and devices plus determine exactly what is on your Cat5/6 network. And, if you work with PoE, you can test for voltage and test the operation of your PoE voltage source.
Want more information? Please select one of our videos
Top of Page
|
Part #:
CPK1000IL
Cable&Power Kit. Combines the Real World Certifier digital
cable tester with the Power Panel Cat5/6 DVM.
This kit gives you the high performance Real World Certifier
(with 250 report storage) with the Power Panel Inline Version Cat5/6 DVM at
a terrific savings. This kit has everything you need to
thoroughly test cables and devices plus determine exactly
what is on your Cat5/6 network. And, if you work with PoE,
you can test for voltage and test the operation of your PoE
voltage source.
Want more information? Please select one of our videos
Top of Page
|
Part #:
DVM850BL
Digital Multimeter, 19 ranges, 3 1/2 digit LCD, AC/DC volt, resistance, DC Amp, transistor/diode test, Hold Function, backlight, includes test leads
Top of Page
|
Part #:
POE1000
CAT5/6 cables are jammed with data, phone, surveillance cameras.... and now 48 volts of PoE ("Power over Ethernet"). The Power Panel DVM spots these devices. Plus, two interactive buttons exercise both switches equipped with or without POE.
Want more information? Please select one of our videos
Top of Page
|
Part #:
POE1000IL
The most popular Power Panel CAT5/6 DVM model has all the features of the Standard unit plus the ability to connect between 2 devices inline. Inline connections allow: passing PoE power to the device, monitoring the device while it is on, plus the Inline Power Panel measures and displays power in Watts. CAT5/6 cables are jammed with data, phone, surveillance
cameras.... and now 48 volts of PoE ("Power over Ethernet").
The Power Panel DVM spots these devices. Plus, two
interactive buttons exercise both switches equipped with or
without POE.
Want more information? Please select one of our videos
Top of Page
|
Part #: POE1000ILT The POE1000IL inline Power Panel with the World's Best Probe included.
Top of Page
|
Part #:
RWC-EG005
A Hub, Switch, or PC connected to a cable provides the real data that allows the Real World Certifier to conduct Level 2 tests on the cable. This Cisco switch is the perfect unit to drive the cables when no other driver is onsite yet. It is small and lightweight and drives all 4 pairs of the cable to a maximum of 1000MB
Top of Page
|
Part #:
RWC1000K
Byte Brothers Real World Certifier Features: Speed Tests Real World Cert 1 (projected) Real World Cert 2* (confirmed) Cable Typing (Cat3,5,5E,6) Cable Length TDR opens,shorts, split pairs Multi-pair Toner/Probe Stores 250 tests for printing *Uses real data from the Hub, Switch, or PC
If you have any questions
Want more information? Please select one of our videos
Top of Page
|
Part #:
SIE-MODAPT
Siemons 8 conductor modular breakout adapter, RJ45 jack on both ends wired straight-thru, USOC, 568A, & 568B pinouts printed on unit, includes special cable that fits into 2-4-6-8 pin jacks this IS the best mod breakout made!
Top of Page
|
Part #:
SIE-TESTAR-2
The Siemons TESTAR-2 adapter provides easy test access to S66 block, clips. It plugs directly onto a 66M block and provides an RJ11 modular jack interface for plugging in test equipment, etc.
Top of Page
|
Part #:
TVR10/100/1000
Test, verify and repair 10, 100 and 1000 Base-T Networks. The TVR10/100/1000 supports all network speeds plus displays full and half duplex. Go inline between two LAN devices and see if the negotiated speed is what you expect, and if it is somplex/duplex.

Want more information on the TVR10/100/100 watch the video
Top of Page
|
AINES TEST SETS The new Aines ATS-98 and ATS-2000 Telephone Test Sets are
here! A data safe butt set for the telephone and computer
network installer that doesn't break the budget. Feature rich
without sacrificing quality (includes tone & pulse dialing,
speed dial 9 storage spaces, each 18 digits long, last number
re-dial, polarity indicator, mute button, audible ringer,
data safe in monitor mode, and a flash-hook button). The set
supports either loop or ground start operation without the
need for a special cord! These sets are equipped with a high quality cord with Aines famous 5-way clip! The cord is manufactured from tinsel conductors insulated
with PVC and nylon braided from materials which meet MIL SPEC
C-83501. These cords meet both Bellcore and AT&T
specifications. |
Part #:
AIN-ATS2000
ATS-2000 Speakerphone Testset
Features: DTMF/pulse dialing / Polarity Indicators / Data safety in MONITOR Mode / 10 Number Storage
Speed Dial / Last Number Redial / FLASH HOOK Button / MUTE Button
Audible ringer with AUTO-RING sensing / 1 YEAR WARRANTY
Loop Start and Ground Start without need for special cord
Industry standard and approved cord with Alligator clips (piercing pin and bed of nails)
High impact polyamyd plastic case with moisture seal
Top of Page
|
Part #:
AIN-ATS98
ATS-98 Testset
Features: DTMF/pulse dialing / Polarity Indicators / Data
safety in MONITOR Mode / 10 Number Storage
Speed Dial / Last Number Redial / FLASH HOOK Button / MUTE
Button
Audible ringer with AUTO-RING sensing / 1 YEAR WARRANTY
Loop Start and Ground Start without need for special cord
Industry standard and approved cord with Alligator clips
(piercing pin and bed of nails)
High impact polyamyd plastic case with moisture seal
Top of Page
|