|
|---|
VTTEST15
Audio Cable Tester - 10 Way
quick and convenient continuity cable testing for all types of audio cables
FEATURES
* continuity test function (buzzer and LED indication)
* suited for the following connectors and their combinations:
o 6.3mm jack
o 3.5mm jack
o XLR 3P (M/F)
o XLR 5P (M/F)
o phono / RCA
o banana plug
o Speakonr 8P
o Speakonr 4P
o DIN 3P / 5P / 7P / 8P
o 5-pin mini DIN
* LEDs confirm each conductor connection
* 9-way switch for selecting connections to be tested
* battery check function
* rugged, compact, metal construction for ultimate roadworthiness, long life and reliability
* includes one pair of probes
Top of Page
|
ZM104
Impedance Meter, use to troubleshoot 25 & 70 volt paging speaker lines. Figure actual wattage draw on amplifier. Finding a short or an 8 ohm speaker in the line is a frustrating ordeal without this unit. A must have tool for commercial paging installation and service.
Top of Page
|
|
Products>Tools>Compression Crimpers |
|---|
COMPRESSION CONNECTORS
|
|---|
50113
Economy Compression Crimp Tool, works with all of our compression connectors and most other brands, adjustable, fits F, RCA & BNC connectors.
Top of Page
|
5016201
Compression Crimp Tool, works with all of our compression
connectors and most other brands, adjustable, fits F RCA &
BNC, Cushion Grip Handles
Top of Page
|
5016207
Compression Crimp Tool, works with all of our "F" compression
connectors and most other brands, not for use with RCA or BNC connectors, but if you're doing alot of F connectors, this small tool works great, feels "right" in your hand and it's only 5 1/2" long
Top of Page
|
|
Products>Tools>Cutters & Strippers |
|---|
|
|---|
100-318
Economy UTP stripper & 110 Punchdown Tool, This cheap thing actually works pretty good. The twisted pair stripper can cut the outer insulation without nicking the inner insulation, if you only go around once. The 110 punch is great for keystone jacks and patch panels, much less bulk in your hand than standard punch tools.
Try one they're cheap!
1+
$2.95 | 5+
$2.25 | 10+
$1.4750 |
Top of Page
|
10503
The dual function Cut-N-Strip tools' small size and ease of use delivers superior performance and utility of function. The cutting jaws provide a low profile full-flush cut and are manufactured from induction hardened stainless steel for long life. The patented stripper in the handle self-adjusts to wire sizes of 26 AWG to 14 AWG. Catch, hold and strip wire in one quick motion. Cool Tool!
Top of Page
|
10525
Designed for use in electrical, telephone and datacom service applications. The ergonomically designed large ring provides more power while reducing fatigue and wrist strain. Designed to comfortably fit in the power portion of the palm producing a cleaner, quicker cut with less effort. Bottom blade has serrated teeth the full length of the cutting edge to grip the cable/wire. Thru hardened (RC59).
Cuts stranded wire to 12 AWG
Cuts solid wire to 16 AWG
Trims kevlar in fiber optic cable
Strips 19 to 23 AWG wire
Serrated edges on back of blades for cleaning wire and binding posts.
Top of Page
|
10531
The 5" Side Cutting Pliers are perfectly suited for field or production line work. Use for cutting copper wire or trimming leads with the full flush cutting blades. The tool is manufactured from high carbon tool steel, precision ground and hardened for long life. Molded comfort grip handle. Rust resistance black oxide finish.
21° Full Flush Cut
Cuts up to 16AWG Copper
Spring Action
Top of Page
|
10560
This versatile cutter has a specially designed moving blade to handle the larger diameter telephone cables and soft drawn copper and aluminum cables. Cuts up to 2,700 pair telephone cable and up to 750 MCM soft drawn copper and aluminum cables. Cutting blades are manufactured from hardened tool steel for long life durability. The fixed handle cutting boot provides stability and increased leverage. Ratchet lock holds handles in closed position for storage. Black oxide finish.
Top of Page
|
15015
Cable Jacket Stripper, Designed for stripping the cable jacket on Category 5, 5e cables, No Adjustments required, Will not nick inner conductors
Top of Page
|
200-001
Wire Stripper, strips 20-30AWG wire, built-in wire cutter & pliers
Top of Page
|
200-007
Eclipse® economy stripper, strips 10-30AWG wire
Top of Page
|
200-010
Wire Stripper, strips 10-20AWG wire, built-in wire cutter & pliers
Top of Page
|
200-026
Cyclops Data Cable Stripper, fast easy removal of outer sheath insulation (PVC & Plenum) from UTP, STP, & multicore cables up to .433" diameter
Top of Page
|
200-046
Cable Cutter, cuts up 2/0 wire or 100 pair telephone cable, use on copper cable only
Top of Page
|
250112
Coaxial cable stripper, auto-adjust for RG58/59/6, 2 blade, includes allen wrench for fine tuning
Top of Page
|
BEN-UPB200
Aussie Lineman's Pliers by Benner-Nawman®. This is a unique design from the land down under. This has a by-pass cutter that can cut up to 50-pair communication cable. The pliers will grip and hold the smallest wire and there is a built-in crimper. Made from forged tool steel and heat-treated for long life. Heavy duty orange plastic handles. The overall length is 8-1/2". Not designed for cutting steel or ACSR materials.
Top of Page
|
BEN-UPB240
The UP-B240 Shark can cut 100-pair telephone cable, 4/0 aluminum and 2/0 copper. This is the best high leverage cutter. The special grinding and blade design cannot be found in any other tool. There are other tools available in the market but if you actually compare cut for cut the Shark has no competition. Made in the USA from forged tool steel with a specially honed cutting blade that is designed like no other, ask for The Shark by Benner-Nawman®.
Top of Page
|
BEN-UPB36
Benner-Nawman® Cable Slitter, slits 1, 2, & 5 pair buried or aerial drop wire and for sheathing 25 & 50 pair communications cable
Top of Page
|
BEN-UPB41
This is the lineman's best cutter for multi-stranded communication cable. It has a patented offset bite which eliminates compression and frayed ends. It can easily cut 50 pair communication cable, 2/0 aluminum cable and #2 copper cable. Lightweight and compact (only 8" long), it will fit conveniently in your tool pouch or belt. Look for the orange handles. Benner-Nawman®
Top of Page
|
BEN-UPB606
Wire Prep Kit, includes: Serrated Scissors with a notch to keep wire from slipping during cutting, Cable Splicers Knife, and Leather Pouch. Specifically designed for telephone wire and light gauge fiber optics.
Top of Page
|
BEN-UPB76
The UP-B76, also known in the cabling business as The Banana Cutter because of the distinctive yellow handles, is used by CATV installers on coaxial cable all over the world. This clean cutting, one-handed instrument is both lightweight and compact to fit into a tool pouch. It is designed to function just like a tube cutter to eliminate cable distortion during cable preparation. This tool was designed to cut up to 3/4" cable. The UP-B76 is the ideal tool for telecommunication, computer and CATV industry applications.
by Benner-Nawman®
Top of Page
|
BEN-UPB95
Like the famous Banana Cutter, the UP-B95 is designed specifically to cut coaxial cable. The difference is that BN engineered a special cutting blade surface that can cut a cable up to and including 1" in diameter. It is designed to function just like a tube cutter to eliminate cable distortion during cable preparation. Like all of their cutting tools, the UP-B95 is dropped forged tool steel and hand-finished by skilled craftsmen here in the USA by Benner-Nawman®
Top of Page
|
BTK
The heavy duty BTK Series Crimping Pliers are designed to provide superior performance, durability and value. It features dual crimping cavities for insulated and non-insulated terminals and splices. The thin tapered nose assists when working in confined areas. The cutting blades are precision ground and hardened for long life. Dipped vinyl grip handles. 9-1/2" long, cuts 10AWG Copper
Top of Page
|
BTP-6
The rugged drop forged construction of the BTP-6 Cutter, provides exceptional durability and professional results. Dual elliptical cutting blades are precision ground to provide low effort cutting of coaxial cables without deforming the cable dielectric. Cuts twisted pair cables, both UTP/STP, and a wide range of coax. Non-slip cushioned handles fit the hand and the tool pouch. Cuts up to 6AWG copper.
Top of Page
|
IDL-35088
Ideal® Electricians Scissors with stripping notches, cuts up to 16AWG solid or 12AWG stranded wire
Top of Page
|
IDL-45121
Ideal® T-Stripper, T-6, strips 16-26AWG stranded wire, built-in wire cutter
Top of Page
|
|
Products>Tools>Discontinued/Closeouts |
|---|
BES-FIB3454
Drill Bit 3/4"X54" flexible, paddle type blade with self-
feeding tip. 1/4" shaft
closeout limited quantities
Top of Page
|
BES-FIB3472
Drill Bit 3/4"X72" flexible, paddle type blade with self-feeding tip. 1/4" shaft
closeout limited quantities
Top of Page
|
IDL-30505
Ideal® ratcheted crimper for 2, 4, & 6 pin modular
plugs, RJ11/14/25, parallel crimping action & ratcheting insures good crimp every time
discontinued part number, limited quantities.
Top of Page
|
|
Products>Tools>Drill Bits |
|---|
PIRANHABITS
 Piranhabits are flexible shaft drill bits designed for drilling inside walls, or around corners. Fish eye holes are provided at each end of the bit, which allows the operator to pull wires from either direction after drilling.
An optional insulated steering guide helps the operator to manipulate the bits within the wall cavity.
All Piranhabits are mig-welded to a flexible chrome silicon shaft for superior strength. These invaluable tools can be inserted through small wall openings by the operator to bore holes through studs within the wall cavities without damaging finished walls or ceilings.
Available in 3 types:
Self Feed Auger
Carbide Masonry
High Speed Steel
Also available are 4 to 6 foot extensions
Made in USA
|
|---|
AUG1236
1/2" X 36" Auger Piranhabit Fast and agressive self feed auger bit, welded to a flexible shaft. Cuts clean holes.
Use for wood only. 3/16" shaft
Top of Page
|
AUG1248
1/2" X 48" Auger Piranhabit Fast and agressive self feed
auger bit, welded to a flexible shaft. Cuts clean holes.
Use for wood only. 3/16" shaft
Top of Page
|
AUG1272
1/2" X 72" Auger Piranhabit Fast and agressive self feed
auger bit, welded to a flexible shaft. Cuts clean holes.
Use for wood only. 3/16" shaft
Top of Page
|
AUG3436
3/4" X 36" Auger Piranhabit Fast and agressive self feed
auger bit, welded to a flexible shaft. Cuts clean holes.
Use for wood only. 1/4" shaft
Top of Page
|
| |
|---|
Call using Skype
